Spencer Westfall, a graduate student at Indiana University, presented at the Vanderbilt Seminar Series.
The resource presents a built‑in self‑test (BIST) architecture designed to characterize single‑event effects (SEE) in a commercially available bulk 90 nm CMOS technology. By integrating the test circuitry on‑chip, the approach enables comprehensive radiation‑hardness evaluation while reducing external instrumentation, a capability that is increasingly critical for modern mixed‑signal and digital systems operating in harsh environments. The work leverages collaboration among academic and industry partners to provide a reproducible platform for SEE investigation.
The presentation details the implementation of a radiation‑effects test coupon containing dedicated macros for single‑event transients (SET) and single‑event upsets (SEU). SET targets consist of large combinational logic blocks (inverters and NAND gates) arranged in colored arrays, while SEU circuitry comprises multiple shift registers fabricated from standard‑cell libraries and an in‑house hardened cell based on a dice layout. Experiments are conducted at Lawrence Berkeley National Laboratory’s 88‑inch cyclotron using a 16 MeV ion cocktail spanning LET values from ≈2 MeV·cm²/mg to ≈65 MeV·cm²/mg. The BIST architecture requires only a microprocessor and a power supply; on‑chip measurement blocks generate trigger pulses, feed a time‑to‑digital converter (TDC) built from a veneer delay‑line, and serialize results via a parallel‑in‑serial‑out register. The TDC produces a thermometer code that, when summed and multiplied by the 70 ps buffer delay, yields pulse‑width measurements covering 0.07 ns to 8.9 ns. Real‑time data acquisition and analysis are performed through a custom GUI that logs and processes the SET and SEU responses, including cross‑section versus LET and shift‑register upset patterns for various well‑tap spacings.
With this knowledge, learners can explain the BIST architecture for SEE characterization, interpret the radiation‑testing measurement data, and compare pulse‑width distributions across different LET levels and circuit types. They also acquire the ability to analyze shift‑register upset patterns and extract cross‑section results, informing design choices for radiation‑tolerant circuits and guiding further research into mitigation strategies for bulk 90 nm technologies.