Total Ionizing Dose Response Mechanisms in a 12-nm FinFET Technology

Professor Hugh Barnaby of Arizona State University presented a talk given at the 2024 Microelectronics Reliability and Qualification Workshop (The Aerospace Corporation) at the Vanderbilt Seminar Series.

The response of advanced complementary‑metal‑oxide‑semiconductor (CMOS) devices to total ionizing dose (TID) is a critical concern for space‑borne and high‑energy‑physics electronics, where radiation‑induced leakage can compromise functionality. This resource focuses on the 12‑nm FinFET technology that is currently being fabricated by leading foundries, highlighting why understanding its radiation tolerance is essential for reliable system design in harsh environments.

The presentation traces the evolution from planar bulk transistors through partially depleted and fully depleted silicon‑on‑insulator (SOI) structures to the modern bulk FinFET, emphasizing the fully depleted symmetric‑gate architecture that underlies the 12‑nm device. Detailed cross‑sectional analyses reveal the role of the spacer and the sub‑fin region, where thick shallow‑trench isolations (STIA/STIB) accumulate positive charge under Cobalt‑60 exposure. TCAD simulations and wafer‑level probe‑card measurements demonstrate that this charge buildup in the sub‑fin STI inverts sidewalls and creates a parallel parasitic leakage path, while threshold voltage and drive current remain largely unchanged. Variations in sub‑fin doping are shown to modulate the severity of the leakage, with lower doping amplifying the radiation‑induced current increase.

Armed with this knowledge, learners can distinguish the structural nuances among planar, partially depleted, and fully depleted FinFET technologies and evaluate how bulk versus SOI architectures influence radiation‑induced leakage. They are equipped to interpret experimental TID data for 12‑nm FinFETs, linking observed leakage trends to charge accumulation mechanisms, and to assess how sub‑fin doping strategies affect post‑irradiation performance, thereby informing design choices for radiation‑hard electronics.

Previous
Previous

Radiation Enabled Model Development and Validation

Next
Next

Radiation Testing of Edge Processors for DAVINCI, A NASA Mission to Venus